VS Factory Daytona 126506 V3 4131 Weighted Version Guide
The VS Factory Daytona 126506 V3 is an updated weighted configuration featuring a 4131-style automatic chronograph movement and revised weight distribution across both the case and bracelet.
One of the most important changes from the previous V2 generation is the overall weight. According to the supplied specifications, the V3 weighs approximately 175.3g, representing an increase of about 12g over the previous V2 configuration.
Rather than evaluating this version only through market terms such as “super clone watch,” the more useful technical points are how the additional mass is distributed, whether the external dimensions remain unchanged and how the individual watch performs during QC testing.
V3 Weight Update
The primary V3 update focuses on increasing overall watch weight.
The supplied specification lists:
Version Data Specification
Version V3
Movement 4131-Style Automatic
V3 Weight Approx. 175.3g
Increase vs V2 Approx. 12g
Weighting Areas Case + Bracelet
Instead of concentrating the additional mass in only one area, the V3 incorporates weighting into both the watch case and bracelet.
This is important because total weight and weight distribution are two different characteristics. Two watches with the same total weight can feel different on the wrist depending on where the mass is positioned.
Case and Bracelet Weighting
The V3 uses a combination of stainless steel and higher-density material to increase mass within the existing construction.
According to the supplied information, this weighting method is designed to increase overall weight without intentionally enlarging the external case dimensions.
This is a more useful technical distinction than simply describing the watch as a “weighted version.”
When inspecting an individual V3 watch, case width and thickness should still be physically measured during QC.
Why Dimensions Matter
Adding weight to a watch is relatively straightforward if the case or bracelet components are simply made larger or thicker.
The more technically relevant challenge is increasing mass while maintaining the intended exterior dimensions and proportions.
For this reason, a weighted-version comparison should record at least three measurements together:
Weight + Case Width + Case Thickness
Weight alone does not provide enough information to evaluate how the V3 construction differs from an earlier version.
175.3g Total Weight
The supplied V3 measurement is approximately 175.3 grams.
Compared with the previous V2 specification, this represents an increase of approximately 12 grams.
The additional weight primarily changes the physical feel of the watch on the wrist. It should not be interpreted as a direct indication of better movement performance or overall quality.
Actual weight can also vary slightly according to bracelet sizing and the number of installed links.
4131-Style Automatic Chronograph Movement
The V3 uses a 4131-style automatic mechanical chronograph movement.
Its chronograph functions should be evaluated separately from the weighted case construction.
Important functional checks include:
- Chronograph start
- Chronograph stop
- Chronograph reset
- Central chronograph seconds
- Subdial operation
- Hand reset alignment
- Automatic winding
The fact that a watch is heavier does not affect whether the movement itself has been correctly assembled or regulated.
Ice Blue Dial Configuration
This version uses the recognizable ice-blue dial configuration associated with the Daytona 126506 design.
For QC purposes, useful dial-side inspection points include marker alignment, hand positioning, subdial alignment, printing and chronograph reset position.
These visual checks should be considered separately from movement performance and case weight.
Weighted Version vs Movement Performance
A common mistake when comparing weighted watches is to treat higher weight as evidence of better mechanical quality.
These are separate characteristics.
Weight primarily affects wrist feel and physical balance.
Movement performance should instead be evaluated using measurements such as:
- Daily Rate
- Amplitude
- Beat Error
- Beat Rate
Chronograph operation should also be tested independently.
This distinction is particularly useful when comparing different production versions of the same model.
V2 vs V3
The most clearly documented change in the supplied information is the revised V3 weighting system.
The V3 adds approximately 12g compared with the previous V2 configuration and distributes additional mass through both the case and bracelet.
This makes the V2-to-V3 change primarily a weight and construction update, rather than simply a cosmetic revision.
If detailed V2 measurements become available, case thickness, width, bracelet configuration and individual QC data can be compared directly in the database.
What to Check During QC
For the VS Factory Daytona 126506 V3, useful QC records include the actual weight, case width and thickness alongside movement testing.
The most useful dataset would include:
- Actual Weight
- Case Width
- Case Thickness
- Daily Rate
- Amplitude
- Beat Error
- Beat Rate
- Chronograph Start/Stop
- Chronograph Reset
- Crown Operation
- Bracelet and Clasp
- Dial Alignment
Recording these values makes it possible to compare individual V3 watches and future production batches using measured data rather than marketing descriptions.
Technical Specifications
Specification Details
Factory VS Factory
Model Daytona 126506 Style
Version V3
Dial Ice Blue
Movement 4131-Style Automatic Chronograph
V3 Weight Approx. 175.3g
Weight Increase Approx. 12g vs V2
Weighting Case + Bracelet
Primary Case Material Stainless Steel
Additional Weighting Higher-Density Material
Functions Hours, Minutes, Seconds & Chronograph
Frequently Asked Questions
- What is the main update to the VS Daytona 126506 V3?
The main documented V3 update is its revised weighting system. Additional mass is incorporated into both the case and bracelet.
- How much does the V3 weigh?
The supplied specification lists the V3 at approximately 175.3g. Actual weight can vary slightly depending on bracelet sizing and installed links.
- How much heavier is V3 than V2?
According to the supplied data, the V3 is approximately 12g heavier than the previous V2 configuration.
- Does the V3 use a different case size because it is heavier?
The supplied information states that the weighting update was designed without intentionally changing the external dimensions. Actual case width and thickness should still be verified during QC.
- What movement does the VS Daytona V3 use?
This configuration uses a 4131-style automatic mechanical chronograph movement.
- Does a heavier Daytona mean better quality?
Not necessarily. Additional weight mainly affects wrist feel and balance. Movement condition should be evaluated separately using timegrapher data and functional QC testing.
