P1 Factory Patek Philippe Aquanaut Chronograph 5968 Version Guide
The P1 Factory Patek Philippe Aquanaut Chronograph 5968 is currently presented in four configurations with different dial colors and case finishes.
The supplied dimensions for this series are approximately 42.2mm × 12.5mm.
Rather than treating every P1 Factory 5968 as the same watch, the reference number and dial configuration should be identified separately. This is particularly important because the 5968G, 5968R and 5968A versions use noticeably different exterior combinations.
The general market term “super clone watch” does not identify these differences, so the reference and physical specifications remain more useful for technical comparison.
P1 Factory 5968 Series Dimensions
The supplied dimensions for the current P1 Factory 5968 series are:
- Case Width: 42.2mm
- Case Thickness: 12.5mm
These dimensions provide a useful reference when comparing the four configurations.
Individual watches should still be measured during QC if exact case dimensions are required, since minor variations can occur because of production tolerance or measuring method.
5968G-001 Blue Dial
The 5968G-001 configuration uses a blue dial.
This version is presented with a bright white-tone case and clasp finish associated with the 5968G configuration.
The blue dial provides a cooler overall color combination and distinguishes this reference from the green, brown and black dial variants within the same P1 Factory series.
5968G Green Dial Configuration
A second 5968G configuration uses a green dial.
Like the blue version, it is presented with a bright white-tone case and clasp.
The main visual difference between these two 5968G versions is therefore the dial color rather than the overall case profile.
When comparing the two, useful QC inspection points include dial tone, marker alignment, hand positioning and case finishing.
5968R-001 Rose-Gold-Tone Brown Dial
The 5968R-001 uses a rose-gold-tone exterior combined with a brown dial.
This gives the watch a warmer appearance than the two white-tone 5968G configurations.
For database purposes, the 5968R should be treated as a separate reference rather than simply another dial-color variation because both the case tone and dial configuration differ.
5968A-001 Steel Black Dial with Orange Hand
The 5968A-001 uses a steel-tone case with a black dial and distinctive orange chronograph hand.
The orange hand is one of the easiest visual identifiers of this configuration and creates a strong contrast against the black dial.
Because of this recognizable combination, it is useful to record the 5968A separately within the model database rather than grouping all 5968 versions under a single generic description.
Four-Version Reference Overview
The current information identifies four P1 Factory 5968 configurations:
Reference Dial Exterior Tone Key Visual Detail
5968G-001 Blue Bright white tone Blue dial
5968G Green Bright white tone Green dial
5968R-001 Brown Rose-gold tone Warm-tone combination
5968A-001 Black Steel tone Orange chronograph hand
This table is based only on the supplied model information and does not assume unconfirmed movement or material specifications.
Why Reference Numbers Matter
The Patek Philippe 5968 family includes multiple exterior configurations, so simply identifying a watch as a “5968” does not fully describe it.
Useful identification should include:
- Factory
- Full reference
- Dial color
- Exterior case tone
- Case dimensions
- Strap configuration
- Movement specification
- Actual QC data
As additional technical information becomes available, each reference can be expanded independently within the database.
Case Color and Finishing
The supplied information describes the two 5968G versions as having a brighter white-tone appearance than a conventional steel finish.
The 5968R uses a rose-gold-tone finish, while the 5968A uses a steel-tone exterior.
Instead of describing one finish as better than another, these should be treated as different visual configurations within the same model family.
Surface consistency, brushing, polishing and clasp finishing can then be inspected individually during QC.
What to Check During QC
Because the four models share similar general dimensions but use different exterior combinations, useful QC points include:
- Actual Case Width
- Actual Case Thickness
- Watch Weight
- Dial Color and Finish
- Marker Alignment
- Chronograph Hand Alignment
- Case Surface Finishing
- Clasp Alignment
- Crown and Pusher Operation
- Movement Type
- Daily Rate
- Amplitude
- Beat Error
- Beat Rate
Once these measurements are recorded for each version, the P1 5968 page can develop from a basic model guide into a more useful long-term technical database.
Technical Specifications
- Factory: P1 Factory
- Collection: Patek Philippe Aquanaut Chronograph 5968
- Number of Current Configurations: 4
- Case Width: Approximately 42.2mm
- Case Thickness: Approximately 12.5mm
- 5968G-001: Blue Dial
- 5968G: Green Dial
- 5968R-001: Rose-Gold-Tone / Brown Dial
- 5968A-001: Steel-Tone / Black Dial / Orange Chronograph Hand
Frequently Asked Questions
- How many P1 Factory 5968 versions are currently listed?
The supplied information identifies four configurations: two 5968G variants, one 5968R-001 and one 5968A-001.
- What are the dimensions of the P1 Factory 5968?
The supplied dimensions are approximately 42.2mm wide and 12.5mm thick.
- What is the difference between the two 5968G versions?
The main listed difference is the dial color. One uses a blue dial, while the other uses a green dial.
- Which P1 Factory 5968 has the orange chronograph hand?
The 5968A-001 uses a black dial with a distinctive orange chronograph hand.
- What configuration does the 5968R-001 use?
The 5968R-001 combines a rose-gold-tone exterior with a brown dial.
- Are all P1 Factory 5968 watches technically identical?
That should not be assumed. The four references have different exterior configurations, and movement or other technical specifications should be confirmed separately when the relevant data is available.
