Clean Factory Rolex Submariner 124060 – 3230 Movement Guide
The Clean Factory Rolex Submariner 124060 is the 41mm no-date configuration of the Submariner, combining a black dial and ceramic bezel with a 904L stainless-steel case and bracelet.
Compared with date-equipped Submariner configurations, the most obvious difference is the cleaner dial layout. There is no date window and no Cyclops magnifier on the crystal, leaving the hour markers and hands as the main visual elements.
This Clean Factory version is supplied with a 3230-style automatic mechanical movement, with a stated power reserve of approximately 72 hours.
Other details worth looking at include the dial construction, luminous material, bracelet finishing and ceramic bezel.
41mm No-Date Submariner
The 124060 uses a 41mm case and a symmetrical no-date dial.
Removing the date window changes the appearance more than it might initially seem.
Without a date aperture at 3 o’clock, the hour-marker layout remains balanced across the dial. The crystal also remains visually clean because there is no date magnifier.
For anyone who prefers a simpler Submariner layout, this is one of the defining characteristics of the 124060.
Actual case thickness and complete weight are also useful measurements when an individual watch is available for testing.
904L Stainless-Steel Construction
The supplied specifications identify 904L stainless steel for the case construction.
The bracelet is described as an AR-style steel bracelet paired with this Clean Factory configuration.
On a steel Submariner, finishing can be examined across several different areas rather than judging the watch only from its front appearance.
Useful areas include:
- Case sides
- Lug edges
- End links
- Bracelet links
- Clasp
- Bracelet underside
- Case-to-bracelet transition
The bracelet should also articulate naturally without individual links feeling unusually tight or loose.
Bracelet and End-Link Fit
The transition between the case and bracelet is particularly noticeable on a Submariner because the bracelet begins immediately below the relatively broad lugs.
End links should sit consistently against the case, while the gaps on both sides can be compared under close-up photography.
The clasp can also be tested separately for opening, closing and locking operation.
These functional details are more useful than relying only on the factory name of the bracelet.
Black No-Date Dial
The 124060 uses a black no-date dial, creating one of the cleanest layouts within the Submariner family.
The supplied information refers to what is sometimes called a “pot-cover dial” or “锅盖字面” in the replica-watch market.
This is an informal industry term rather than an official dial specification.
The more useful technical point is that the supplied dial is described as using a dial-feet-free construction.
Instead of treating this construction as automatically better or more expensive, it is better to look at the finished result: dial position, alignment, hour-marker placement and clearance between the dial and hands.
Dial Alignment
Because the 124060 does not have a date window, the dial is visually simple.
That simplicity makes alignment particularly easy to inspect.
The main areas worth checking are:
12 o’clock triangle → 3 o’clock marker → 6 o’clock marker → 9 o’clock marker
These four reference points provide a quick way to judge overall dial symmetry.
The minute track, individual markers and hands can then be examined more closely.
Luminous Hands and Hour Markers
The supplied information references Swiss C1 and C3 luminous materials used during production, with particular attention paid to keeping the luminous appearance of the hands and hour markers consistent.
This is worth checking under both normal lighting and darkness.
Under daylight, the filling of the markers and hands can be examined for consistency.
After charging the luminous material under the same light source, the watch can then be photographed in darkness to compare:
- Hand color
- Hour-marker color
- Initial brightness
- Distribution
- Fade characteristics
Rather than claiming the hands and markers are always exactly the same color, an actual lume photograph provides much stronger evidence for an individual watch.
Black Ceramic Bezel
The 124060 uses a black ceramic bezel insert.
The ceramic surface changes considerably depending on lighting. Under direct light it can appear highly reflective, while softer lighting produces a much darker appearance.
Besides surface appearance, the bezel should be tested mechanically.
Rotation should feel consistent through the complete range, and the triangle at 12 o’clock should align correctly with the corresponding dial marker when returned to its starting position.
The engraved bezel markings and their filling can also be examined under macro photography.
3230-Style Automatic Movement
Inside the Clean Factory 124060 is a 3230-style automatic mechanical movement.
Because the 124060 has no calendar display, the movement configuration is focused on timekeeping without a visible date complication.
The supplied specification states a power reserve of approximately 72 hours.
This makes power reserve one of the characteristics that can be tested objectively rather than judged visually.
Approximately 72-Hour Power Reserve
A stated 72-hour power reserve means the watch should be capable of running for roughly three days from an appropriate full wind under the stated configuration.
For an individual watch, actual testing provides the more useful result.
The movement can be fully wound, the starting time recorded and the watch then left without further winding or wrist movement until it stops.
The measured result can then be compared with the stated approximately 72-hour specification.
Movement Testing
Power reserve is only one aspect of movement performance.
A timegrapher can also record:
Daily Rate → Amplitude → Beat Error → Beat Rate
These measurements provide a snapshot of the movement’s running condition during testing.
They are particularly useful when comparing individual watches because two examples using the same movement type can still produce different results depending on regulation and movement condition.
Super Clone Watch and Actual QC Data
The term super clone watch is commonly used for higher-specification replica watches such as this category of Submariner, but it should not be treated as a defined technical grade.
The more useful information comes from specifications that can actually be identified or measured: movement architecture, case dimensions, complete weight, power reserve, timegrapher results, bezel operation and luminous performance.
For actual movement measurements and physical data from an individual watch, see our Clean Factory Rolex Submariner 124060 QC test.
Details Worth Checking
For an individual Clean Factory 124060, the actual case width, thickness and complete weight are useful measurements to record first.
The black dial can then be inspected for marker and hand alignment, followed by a lume test comparing the hands and hour markers under the same charging conditions.
The ceramic bezel should rotate correctly and return to proper 12 o’clock alignment.
The crown can be tested for manual winding and time setting, while the 3230-style movement can be measured for daily rate, amplitude, beat error and beat rate.
If the approximately 72-hour power reserve is important, this can be tested independently from a full wind.
Technical Specifications
Specification Details
Factory Clean Factory
Reference 124060
Collection Submariner
Case Diameter 41mm
Calendar No Date
Case Material 904L Stainless Steel
Bezel Black Ceramic
Dial Black No-Date
Dial Construction Dial-Feet-Free, per supplied specification
Movement 3230-Style Automatic
Stated Power Reserve Approx. 72 Hours
Bracelet AR-Style Steel Bracelet
Luminous Material C1 / C3 referenced in supplied specification
Thickness Recommended to Measure Individually
Weight Recommended to Measure Individually
FAQ
- What size is the Clean Factory Submariner 124060?
This configuration uses a 41mm case and the no-date Submariner dial layout.
- What movement does the Clean Factory 124060 use?
It is supplied with a 3230-style automatic mechanical movement with a stated power reserve of approximately 72 hours.
- Does the 124060 have a date function?
The 124060 is the no-date Submariner configuration, so there is no date window on the dial and no Cyclops date magnifier on the crystal.
- What does “pot-cover dial” mean?
“Pot-cover dial” or “锅盖字面” is an informal term used in parts of the replica-watch market. For this version, the more relevant construction detail is the supplied description of a dial without conventional dial feet.
- Are the hands and hour-marker lume exactly the same color?
The supplied information states that C1/C3 luminous materials are used with the intention of maintaining visual consistency. Actual color and brightness are better confirmed through a lume test on the individual watch.
- What should be checked on a Clean Factory 124060?
Useful checks include actual dimensions, weight, daily rate, amplitude, beat error, beat rate, power reserve, dial alignment, lume consistency, bezel rotation and alignment, crown operation, bracelet fit and clasp operation.
