RM Factory Richard Mille RM 35-03 Five-Version Technical Guide
The RM Factory Richard Mille RM 35-03 series is currently presented in five configurations, distinguished primarily by their case colors and composite material specifications.
The supplied dimensions are approximately 43mm × 13.5mm, with all five configurations using an integrated automatic mechanical movement.
The current series includes Tiffany blue, yellow, white and blue NTPT-style configurations, together with a black TPT-style version.
Although “super clone watch” is sometimes used as a general market term for watches in this category, it does not define the materials, movement architecture or dimensions of an individual RM 35-03. For technical comparison, the exact version and physical specifications provide more useful information.
Five RM 35-03 Configurations
According to the supplied information, the current RM Factory RM 35-03 range contains five versions:
Version Case Color Listed Material
RM 35-03 Tiffany Blue NTPT Composite
RM 35-03 Yellow NTPT Composite
RM 35-03 White NTPT Composite
RM 35-03 Blue NTPT Composite
RM 35-03 Black TPT Composite
The primary visible difference between these configurations is the color and layered appearance of the composite case.
Because composite patterns can vary from piece to piece, the exact surface pattern should be inspected on the individual watch.
43mm Case
The supplied case width is approximately 43mm.
Richard Mille-style cases use a curved tonneau-shaped profile, so the wearing characteristics cannot be judged from width alone.
Case length, curvature, thickness and strap position also influence how the watch sits on the wrist.
For this reason, actual QC measurements are useful when comparing different RM 35-03 versions.
13.5mm Case Thickness
The supplied thickness is approximately 13.5mm.
Maintaining a relatively controlled thickness is particularly relevant to a complex tonneau-shaped case because the movement, crystal, case back and internal mounting structure all need to fit within the available vertical space.
For database purposes, width and thickness should therefore be recorded together:
43mm width × approximately 13.5mm thickness
Actual measurements can be added when an individual watch undergoes QC.
NTPT and TPT Composite Cases
The supplied specifications describe four versions as using NTPT-style composite material and the black configuration as using TPT-style carbon composite material.
These materials are constructed using layered composite structures rather than conventional solid metal.
When the material is machined into the final case shape, the individual layers can create visible patterns across the surface.
This means two cases of the same color may show small differences in their visible pattern.
Tiffany Blue NTPT Version
The Tiffany blue configuration uses a light blue NTPT-style composite case.
Its layered construction can produce variations in tone and pattern depending on the orientation of the composite layers and the viewing angle.
For QC, useful inspection areas include case-surface consistency, machining around the screws and crown, and the transition between the case sections.
Yellow NTPT Version
The yellow version uses a bright yellow NTPT-style composite configuration.
Because lighter and brighter composite colors can make surface variations easier to see, inspection under neutral lighting is useful when evaluating the finished case.
White NTPT Version
The white configuration uses a light-colored NTPT-style composite case.
As with the other layered versions, minor differences in visible texture can occur as part of the composite structure.
Surface pattern should therefore not be evaluated in exactly the same way as a painted or uniformly coated metal case.
Blue NTPT Version
The blue configuration uses a darker blue NTPT-style composite case.
The layered pattern remains visible across different sections of the case and can change in appearance according to lighting and viewing angle.
Black TPT Version
The black configuration is listed with a TPT-style carbon composite case.
The darker material makes the layered carbon-style pattern one of the main visual characteristics of this version.
When inspecting the case, attention should be given to machining quality around edges, openings, screws and the interfaces between individual case components.
Integrated Automatic Movement
All five configurations are described as using an integrated automatic mechanical movement.
An integrated architecture is technically different from a movement that relies primarily on additional decorative plates to reproduce another caliber’s visual layout.
On this RM 35-03 configuration, the movement forms an important part of the dial-side appearance because much of the mechanical structure remains visible from the front.
The exact caliber designation was not included in the supplied information, so it should be confirmed separately rather than inferred.
Visible Movement Architecture
The openworked construction allows several areas of the movement to remain visible from the dial side.
This makes movement architecture and finishing part of the exterior design of the watch.
Visible areas can include bridges, gear components, screws and other parts of the automatic mechanical system.
During inspection, functional movement components should be distinguished from purely decorative elements when comparing different versions.
Movement Finishing
The supplied information describes several types of surface treatment across the visible movement components, including:
- Black surface treatment
- Beveled edges
- Polishing
- Brushing
- Sandblasted surfaces
Using different finishing methods creates contrast between adjacent components and makes the openworked movement easier to visually distinguish.
Finishing quality should be evaluated separately from mechanical performance.
Lightweight Composite Construction
One reason composite materials are used in this type of watch is their relatively low mass compared with many conventional metal case materials.
However, the actual finished weight depends on more than the outer case.
The movement, screws, crystal, case back, buckle and strap all contribute to total watch weight.
For this reason, the weight of an individual RM 35-03 should be measured during QC rather than estimated solely from the case material.
Why Material Identification Matters
The five versions should not be recorded simply as different colors.
For a useful technical database, each watch should ideally be identified using:
Factory → Model → Case Material → Color → Dimensions → Movement → QC Data
This makes it possible to determine whether later production generations introduce changes to the case material, movement or dimensions without creating multiple nearly identical product descriptions.
What to Check During QC
Useful QC records for an RM Factory RM 35-03 include:
- Actual Case Width
- Actual Case Thickness
- Actual Watch Weight
- Composite Case Pattern
- Case Machining
- Crystal Alignment
- Movement Architecture
- Automatic Winding
- Crown Operation
- Daily Rate
- Amplitude
- Beat Error
- Beat Rate
- Strap Fit
- Buckle Operation
These measurements can later be compared across the five case configurations.
Technical Specifications
Specification Details
Factory RM Factory
Model Richard Mille RM 35-03 Style
Number of Versions 5
Case Width Approx. 43mm
Case Thickness Approx. 13.5mm
Tiffany Blue Version NTPT-Style Composite
Yellow Version NTPT-Style Composite
White Version NTPT-Style Composite
Blue Version NTPT-Style Composite
Black Version TPT-Style Carbon Composite
Movement Integrated Automatic Mechanical
Movement Display Openworked / Visible from Front
Finishing Black Treatment, Beveling, Polishing, Brushing & Sandblasting
Frequently Asked Questions
- How many RM Factory RM 35-03 versions are available?
The supplied information identifies five configurations: Tiffany blue, yellow, white, blue and black.
- What are the dimensions of the RM Factory RM 35-03?
The supplied dimensions are approximately 43mm wide and 13.5mm thick.
- What case materials are used?
The Tiffany blue, yellow, white and blue versions are listed with NTPT-style composite cases, while the black version is listed with a TPT-style carbon composite case.
- Do all five versions use an automatic movement?
Yes. According to the supplied specifications, all five versions use an integrated automatic mechanical movement.
- Why can the composite case pattern differ between watches?
Layered composite materials develop visible patterns when machined. The exact pattern can therefore vary between individual cases depending on the arrangement of the material layers.
- Is every RM 35-03 super clone watch technically the same?
No. “Super clone watch” is a general market term rather than a technical specification. Case material, dimensions, movement architecture, production version and actual QC measurements provide more useful information when comparing individual watches.
